Used LIGNUMA 2005, Sharpening and Machine Maintenance

  • Offer
  • Date
  • Valid until:


Category type Sharpening and Machine Maintenance
Category Sharpening Machine


Condition of the item Used
Date of manufacture 2005
Volume 1 - 1
Description - after the technical review
- very good condition
- production Poland - LIGNUMA

This sharpener is used for sharpening the teeth of band saws. If the sharpener is equipped with a 22 mm wide modular grinding wheel with CBN coating, strictly follow the recommendations for sharpening the saw blades assigned to a specific blade profile.

The ordering party determines which saws he will use before the receipt and receives the right grinding wheel and cam for his machine. Sharpening other saws will damage the grinding wheel.

Way of usage:

The band saw intended for sharpening is placed on the circumferential guide and in the support that guides the saw. In the sharpening area, the band saw is mounted in the holder. The grinding wheel is mounted directly on the shaft of the electric motor. The stroke of the grinding wheel is adjusted with the adjustment nut. The cam drives the feed movements of the sharpened saw. The cam is driven by an electric motor whose speed is regulated from the control panel. The cam also controls the mechanism of the stepped movement (by the size of the tooth pitch) of the sharpened saw. The stroke of the sharpened band saw is adjusted with an adjustment screw. During sharpening, the band saw is cooled with cutting fluid, which is fed to the processing zone by a pump, and then flows into the tank.

Price & Conditions

Price Ask for price
Sells to: Worldwide


I confirm that I have read and understood Fordaq’s Privacy Statement

By registering you agree to our General Conditions