Grain deviation measurement

  • Offer
    18251808
  • Date
    2019-01-28
  • Valid until:
    2019-07-27

Product

Category type Marking - Measuring - Scanning
Category Scanner, Optical
Brand Luxscan Weinig

Specifications

Condition of the item New
Date of manufacture 2019
Volume 1
Description Front-end scanner: Quality control the easy way

The front-end scanner is typically installed behind a cross-cut saw. It scans the cut parts from both sides. This allows defects inside the boards, such as pith, to be detected via their contrast. This information is used for subsequent sorting of products for finger jointing or shared profiles and forwarding of these to a new ejector. This reduces revisions and maximizes recovery. The front-end scanner can be retrofitted with existing scanner systems. Use with cross-cut saws with manual marking is also possible.

Method : while the board is moving laterally, the system grabs an image from the front end of the board. The grain orientation is computed and the heartwood position is estimated. This enables sorting according vertical grain (“rift”), diagonal grain (“half rift”), flat grain (“flader”) . Moreover, curve of the cross section may be measured.

Price & Conditions

Price On demand EUR
Sells to: Worldwide

Seller

I confirm that I have read and understood Fordaq’s Privacy Statement

By registering you agree to our General Conditions